| |
|
|
|
|
|
|
|
|
| |
| |
|
|
|
|
Systems >> UMAC >>
Turbo UMAC CPU Board >> ACC-24E2
|
|
| ACC-24E2 |
|
|
| 2 Axis Digital Direct PWM Axis Interface Board |
|
|
| Part Number: 3R0-603397-10x |
|
|
|
|
| The ACC-24E2 axis interface and breakout board provides the interface circuitry and breakout connectors for either two or four channels of digital servo interface. This accessory is used to control digital amplifiers with direct PWM digital signals. Alternatively, any individual channel of this accessory can be set up to provide a pulse and direction signal (PFM) in case both a digital PWM and a stepper motor are controlled with it. A Mini-D 36-pin amplifier connector is provided for each axis. There is removable encoder terminal block and a removable flag terminal block for each axis. The ACC-24E2 can have either Option 1A for two additional analog servo interface channels or Option 1D for two additional digital servo interface channels. This means that this accessory can be populated with a half digital interface and a half analog interface. This accessory connects to the CPU board through the backplane expansion port. It is intended for UMAC usage only. |
 |
 |
|
|
| |
|
Additional Axes
|
|
|
ACC-24E2 OPT-1D - Additional 2 axes digital PWM Servo interface/breakout |
|
D-SUB Connectors
|
|
|
ACC-24E2 - 2 Axis Digital Direct PWM Interface Board (D-SUB Connectors for wiring) |
|
|
ACC-24E2 OPT-1D - Additional 2 axes digital servo interface/breakout (D-SUB Connectors) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
;){kind=link}