| SZ-1000 Microdrilling
Machine |
 |
|
| The
Industrial Dynamics
SZ-1000
microdrilling machine is the most unique design in the industry,
upholding the theory that simplicity is efficiency. The Model 1000
boasts faster,
more
accurate positioning,
the lowest
power requirements,and
the fastest
spindle design of
any major
manufacturer, known as the Zindle™. Capable of 250,000
rpm, the Zindle™ allows us
to drill with unparalleled results: hole wall quality superior to
laser drilling, hit rates up to 500 hpm, and drilled-hole accuracy ±
0.0007". |
|
|
Why high
RPM?
Higher RPM means faster drill infeed and
faster retract, thus less dwell time in the hole. This allows the
drill to cool, maintaining its integrity for a much longer life.
Faster infeed and retract, combined with faster X-Y positioning,
increase production rate and overall hole wall quality. Among the
benefits of the Zindle's™ design are its ability to maintain more
accurate depth for blind via applications and consistent dynamic
runout less
than 0.0002" at 250,000 RPM
|
| Customer Comments |
|
| "First and foremost, we are satisfied
with the performance of the machine! It gives us capabilities that
we needed and did not have. It has enabled us to meet some customer
specifications that prior to this point we struggled with. Most
importantly, it did what you said it would do!" |
Frank Gango
Vice
President
Manufacturing and
Engineering
Packard Hughes
Interconnect |
| "It has been a pleasure having your Model 1000 driller
aboard. It has been helping us just
fine with our micro as
well as buried vias and depth controls along with its excellent
registrations." |
Kamran A. Saffari
CEO, Crown
Circuits,
Inc. |
|
"The acquisition of the
Model 1000 drill has had a significant, positive impact on
our operations in a variety of ways.
...PHI has been able to
bring new products to market in the last six months that can be
directly attributable to our newfound drilling
capabilities.
...the combination of performance
and support has made a very favorable impression."
|
Paul Morrow
Engineering
Manager
Flex Circuits
Products
Packard Hughes
Interconnect |
| "Multi-Fineline Electronix,
Inc. purchased an SZ-1000 Microdrilling machine with Vision Add-on
from industrial Dynamics to support our need for accurate small hole
drilling on our flexible circuit boards. We have found that this
drill machine works very well for our application. Also, Industrial
Dynamics' service team is very responsive when needed for both
technical and general support." |
Marc Strickland
Production Manager
Multi-Fineline
Electronix, Inc. |
|
|
|
|