Product Update
The following software applications have been updated in the
PMAC-NC Pro2 Runtime
Version 2.1.4.0
PMAC-NC Pro2 Designer
Version 2.1.4.0
Software Application(s) Version
Number
·
NC Setup
(Version 5.1.4.0)
New features added
1. Added
Com Port number for Wireless Pendent connection. This allows user to enter
appropriate COM port number for Wireless pendent connection
Bug Fixes
1.
Fixed
Resetting of Axes Definition value on Exiting from W axis Special
screen.
2.
Modified
display digit Format Specify. Originally restricted to 3 digits
(xx), now
there is no restriction. Also retrieves the user display digits
specify.
3.
PMAC
Type Turbo UL will enable Look ahead mode.
4.
Mill.G
modified for fixing G93 (Inverse time mode) programming bug.
now G93
compatible with FANUC.
5.
"WirelessCOMPort
" registry key resetting to zero on new instance of
AutoPilot
and then pressing Update button for registry update
6.
Added
Default registry settings for axis A, B, C and axis U, V, W axis.
7.
Removed
W- axis replace by Available axis (XYZABCUV) dialog box.
8.
M
codes greater than 100 from .NC
program like M100, M101 will be
parsed and downloaded from Server. This is
default setting.
9.
Added
setting of I38 variable. This variable is necessary for User Position
reporting
PLC. This variable enables Distance To Go Position reporting
function
supported by Turbo PMAC Firmware 1.942 and above.
10. G01.1 code properly shows in
the active G-code display.
·
PMAC-NC (RunTime & Designer) (Version 2.1.4.0)
New
features added
1. Local
language implementation For NC. This
feature will allow the users to modify an NC resource file to change the
display to their desired language format.
2. Hand
wheel mode selection in the software operator panel.
3. Expanded
axis selection (X..W) in the software operator panel.
4. Added
code to display G54.1 Px where x is number between 1 to 48.
1. NC
Position display wasn’t closing the Internal NC device upon exiting and NC
Device was not able to execute NC shutdown procedure and this was causing
problems mostly resulting in not saving parameters.
2. Parametric
Common Variables #500-#599 not retained through power-down.
3. Parametric
Local Variables #1-#33 read/write offset by one variable.
4. Gauge
Block Height input box maintained values on loss of focus
without being entered. User must hit enter for system to accept new
value. No longer retains unaccepted values.
Also by clicking the link below to you can read the history of Software Release Notes for the applications listed above.